Basic Info.
Transport Package
Plastic Packing
Product Description
Automatic round carbon steel bar peeling lathe machine The device is independently developed consulting and comparing the advantages of domestic and foreign prototypes, combining the production characteristics of domestic enterprises with simplified practical design.
The process characteristics of the equipment: simple maintenance, strong practicability, stable processing speeds, fast surface qualities and good surface qualities. The equipment is suitable for steel finishing deep processing enterprises with round bar bright steel used for processing of special steel. This equipment ability to automatically continuous finish all steps at peeling, higher producing efficiency, stable and reliable operating. Because modularization designed for this equipment, ability to provide different technology level according to customer's different requirements.BP40 Technical parameters of peeling machine Unit type | BP-40 |
Main power source | AC 380V 50HZ |
Control source | AC 220V 50HZ |
System control power | DC24V |
Hardness | hot rolled material ≤HB320 |
Peeling length(standard configuration: 2-7.5m) | >=2.2m |
Peeling diameter range size (raw material) | ∮11-41mm |
Peeling diameter range size (finished product) | ∮10-40mm |
Yield Strength | 1200 MPa |
The knife dish form | four knife |
Blade adjustment mode | Adjust the cutter online without stopping |
Speed of mainshaft | 300-2000r/min |
Peeling depth(diameter) | 0.5-1.5mm |
Feeding speed | 0.5-12m/ min |
Diameter tolerance | h9-h11 |
Surface roughness | Ra1.6-3.2 |
Out of roundness | ≤0.05 |
Precision | ≤0.05 |
Straightness (raw material) | <=3‰ |
Straightness (finished product) | <=3‰ |
Loading frame and unloading frame's length (standard configuration) | 6m |
Total power | 58KW |
Main motor power | 37KW |
Feed motor power | 3.0KW*2 |
Pull out motor power | 3.0KW*3 |
Hydraulic pressure station motor power | 3.0KW*1 |
chip removal device motor pwer | 0.75KW*1 |
Motor power of the shrink knife | 0.4KW*1 |
Motor power of upper and lower roller table | 1.1KW*1 |
Weight | 10T |
boundary dimension (m) | 16.5*3.2*1.9 |
Remark:
1, The loading and unloading can be automatic or manual, and the cutting feed size is controlled by electric motor.
2, Constituent part: main machine (clamping and pullout the device), feeding platform, input roller table, output roller table, collection tank, hydraulic system, electrical system, pneumatic system.
3, Automatic chip removal
4,
It can be customized according to your request.BP-40 Peeling machineTechnology ProcessFeeding platform →Pneumatic automatic feeding arm →input roller table→ clip and delivery roller device →peeling →clip and output roller device →output roller table →Pneumatic automatic feeding arm →transition platform →collecting tankProcess descriptionDriving and loading→ driving to swing bar materials to the feed platform. Thin materials need to list neatly by people to prevent the pruning of materials and influence providing materials automatically.Pneumatic automatic feeding hands→ Pneumatic automatic feeding hands move materials to input roller roadInput roller table→ send work pieces to clip and delivery roller deviceHydraulic clip and delivery materials → The pinch roll device is to use two of the pinch roll clamping bar material, hydraulic pressure, two low-speed motor, according to the workpiece feed speed peeling machine.Peeling → high speed peeling the work piece through four cutters of cutter plate on main axleHydraulic pull out →Installed clip out roller device behind the main engine of peeling machine, hydraulic fastening, pulled by three low speed motors, clip and pull out work pieces.Output roller table→ The workpiece to the output roller table, the output rollers roll over automatically and turn the workpiece onto the transition platform.Transition platform→ The workpiece is rolled to the collecting slot on the inclined plane of the transition platform.Finished collecting groove→ Here is the collecting device for the finished product with the weight less than 2000KgFactory scene
Address:
Mingjue Industry Park, Shiqiu Town, Lishui District, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Nanjing Baote Metallurgical Machinery Co., Ltd is located in Mingjue Industrial Park, Lishui District, Nanjing City, Jiangsu Province, China. Our company specializes in the production of Bar Peeling Machines (centerless lathes), 2- Rolls Bar Straightening Machines, various types of Straightening Rollers, Lithium Battery Blades and Bending Machine Moulds. Our products sell well in the mainland of China, some of which have been exported to Southeast Asia, South America, and successfully entered the European market, much favored by users.
We adhere to the management principles of " Quality first, customer first and credit-based" Since the establishment of the company and always do our best to satisfy potential needsof our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.